Telpar MTP-1500, Руководство пользователя

Страница: 43 / 64

Page 43 of 64
GS k +m +n +d1 dn [1D 6B +m +n (DATA)]
For +m = 41hex through 49hex, +m selects the bar code type, +n = number of data bytes to follow.
Bar Code Command Values
+m Bar Code +n(dec)
= Valid data
41 hex UPC-A 11 or 12 0 - 9
42 hex UPC-E 11 or 12 0 – 9
43 hex JAN(EAN)13 12 or 13 0 - 9
44 hex JAN(EAN)8 7 or 8 0 - 9
45 hex CODE39 1 thru 255 0 - 9, A-Z,
space, $ % + - .
/
46hex I 2 of 5 even 1 thru 255 0 - 9
47hex CODABAR 1 thru 255 0 – 9, A,B,C,D,
$ + - . / :
48hex Code93 1 thru 255 00hex thru
7Fhex
49hex Code128 2 thru 255 00hex thru
7Fhex
Table 21 Bar Code Command Values
Notes:
1. +n indicates the number of data bytes which follow.
2. If +n is outside the allowable range, the command aborts and following data is treated as normal data.
Notes when CODE93 (+m=48hex) is used:
1. In the HRI fields, a small square is printed as the start character and as the stop character before and after the
HRI character string.
2. In the HRI field, a small solid block followed by alphabetic character is printed when a control code is printed.
The character printed after the block for each control code is (nn in hex,alphe character): 00,U 01,A 02,B 03,C 04,D
05,E 06,F 07,G 08,H 09,I 0A,J 0B,K 0C,L 0D,M 0E,N 0F,O 10,P 11,Q 12,R 13,S 14,T 15,U 16,V 17,W 18,X 19,Y 1A,Z
1B,A 1C,B 1D,C 1E,D 1F,E 7F,T..
Notes when CODE128 (+m=49 hex) is used:
1. The first character of the bar code data string must be the code set selection character (CodeA, CodeB, or
CodeC) which selects the first code set to use. Code setcharacters are specified by sending a two character
sequence, the first character is { (7B hex) and the second is a printable ASCII character. CodeA = {A, CodeB = {B,
CodeC = {C.
a. Code set A consists of the ASCII characters 00 hex through 5F hex, FNC1 through FNC4, SHIFT, CodeB, and
CodeC.
b. Code set B consists of the ASCII characters 20 hex through 7F hex, FNC1 through FNC4, SHIFT, CodeA, and
CodeC.
c. Code set C consists of 2-digit numeral characters using one character (100 numerals from 00 dec through 99
dec or 00 hex through 63 hex), FNC1, CodeA, and CodeB.
2. Special characters are specified by sending a two character sequence, the first character is { (7B hex) and the
second is a printable ASCII character. The special characters are SHIFT and the FUNCTION characters. SHIFT = {S,
FNC1 = {1, FNC2 = {2, FNC3 = {3, and FNC4 = {4. To specify the character { send {{. The usage of FUNCTION
characters depends on the application program.
3. In code set A the character just after SHIFT is processed as a character for code set B. In code set the
character just after SHIFT is processed as a character for code set C. In code set C the SHIFT is invalid.
4. HRI characters are not printed for the SHIFT characters or CODE SET selection characters.
5. HRI for a Function character is a space.
6. HRI for a control code (00hex through 1Fhex, and 7Fhex) is a space.
7. Errors in the data cause the bar code processing to abort, data following is treated as normal data.
a. The top of the data field is not a code set selection character.
b. If a sequence {+n is invalid.
c. Characters that can not be used in special code set.