Telpar MTP-1500, Руководство пользователя

Страница: 22 / 64

Page 22 of 64
Section 4.4.1 - Set Print
Mode. See ESC M, ESC E,
ESC -, GS!.
Set absolute print position ESC $ +n
+m 1B 24 n m Current print position is set
to (n + m x 256) x 0.125
mm from the beginning of
the line. See ESC \, GS $,
GS\. See Page mode.
Select Bit Image mode ESC \ +m
+n 1 +n 2
+d1 d n
1B 2A +m
+n 1 +n 2
(data)
Set Bit Image mode. See
4.4.2. - Set Bit Image Mode
Turn underline mode on/off ESC - +n 1B 2D +n n=0 (00 or 30 hex) Turn
underline off. n=1 (01 or 31
hex) Turn on 1 dot line high
underline. n=2 (02 or 32
hex) Turn on 2 dot line high
underline. See ESC !.
Set default line spacing ESC 2 1B 32 Set 3.75 mm line spacing
(30 dot lines). See ESC 3.
Set Line feed pitch ESC 3 +n 1B 33 +n Set single line spacing to n
dot lines (n x 0.125mm).
Set independently in Page
and Normal mode. Default
= 30. See ESC 2.
Printer reset ESC @ 1B 40 Resets the printer to the
mode it was in when power
was turned on. Clears the
data in the print buffer but
does not the data in the
receive buffer. The DIP
switches and MEMORY
switches are not rechecked.
The MACRO definition is
not cleared.
Set Horizontal Tab positions ESC D
+d1 d
n
NUL
1B 44
(DATA) 00 Set from 1 to 32 tab
positions. Data values
range from 1 to 255 in
ascending order. If a data
value is less than the
previous data value, this
command is terminated.
NUL terminates this
command when less than
32 TAB positions are being
set. ESC D NUL clears all
tab positions. Default is
every 8 columns.
Turn emphasized mode on/off ESC E +n 1b 45 +n LSB = 0 Turn emphasized
mode off. LSB = 1 Turn
emphasized mode on. See
ESC !.
Turn double-strike mode on/off ESC G +n 1B 47 +n LSB = 0 Turn double strike
mode off. LSB = 1 Turn
double strike mode on.
Printout is the same as
emphasized. See ESC E.
Name
Command Command
Description