Telpar MTP-1500, Руководство пользователя

Страница: 35 / 64

Page 35 of 64
adjustment values is 0.
Save or load
adjustment
values in NV
memory GS ( M +p1
+p2 +n +m 1D 28 4D +p1
+p2 +n +m Function 1 saves the settings made
by GS ( F in NV memory. +n = 1
(either 01 hex or 31 hex), +m = 1
(either 01 hex or 31 hex), +p1=02
hex, +p2=00 hex.
Function 2. +n = 2 (either 02 hex or
32 hex), +m = 0 (either 00 hex or 30
hex), setting made by GS ( F is set
as the default value or +m = any
value except either 00 hex or 30
hex, setting values are stored in
area m of memory, +p1=02 hex,
+p2=00 hex. Must be processed at
the beginning of a line. No effect in
page mode.
Function 3 set whether or not the
value saved in NV memory is the
default to be used at power on. +n =
3 (either 03 hex or 33 hex). +m = 0
(either 00 hex or 30 hex), the printer
does not load the value from NV
memory at initialization. +m = any
value except either 00 hex or 30
hex, the printer loads the value from
NV memory at initialization.
Frequent writes may damage the
NV memory. Maximum
recommended usage is 10 times
per day.
Start/end
macro
definition GS : 1D 3A Macro definition starts when this
command is received during normal
operation and ends when this
command is received during macro
definition. ESC @ does not clear
the contents of the macro definition
so ESC @ can be included in the
macro definition. The contents of
the macro can not exceed 2048
bytes.
Select head
control
method GS E +n 1D 45 +n +n=00 hex, Print speed 1 (150
mm/second). +n=10 hex, Print
speed 2 (100 mm/second). +n=20
hex, Print speed 3 (80 mm/second).
+n=30 hex, Print speed 4 (50
mm/second). When Memory switch
8 position 1 is set to divided energy,
the maximum speed is 120
mm/second. Default is speed 1.
Execute
macro GS ^ +n +m
+o 1D 5E +n +m
+o +n (0 through 255) specifies the
number of times to execute the
macro. +m (0 through 255) specifies
how long to wait between
executions of the macro (m*100
milliseconds) When the LSB on +o
is 0, the macro executes n times at