TellSystem Communication ProCon GSM, Инструкция по установке и эксплуатации

Страница: 8 / 23

ProCon GSM
Connecting process
•
To program the module choose between USB or Bluetooth connection.
•
Below the language selection in the scroll down list (COM 4 in the picture) you can select the port through
which you would like to communicate with the module programmer. You can find this value (in Windows
operating system) under Device manager → Com port at the connected programmer. If you cannot decide
you might let the program to search for it by pressing the automatic COM port finding. The automatic COM
port search might take several minutes.
•
If the connection was successful you will see under the Product connection tab the name of the module.
•
Clicking the start button the software connects to the module and reads out its settings.
•
By clicking the Start/Default config button the module will be set back to default factory settings after the
connection was established. (Before the operation the software asks for confirmation if this feature has not
been switched off before).
•
If you do not want to attach a module just to inspect the settings options you can select the Products-tryout
window where you can freely make a specific module properties selection and also module preprogramming.
Program buildup
•
Upper menu items:
◦ Maintenance: basic menus needed for module maintenance (for ex. module state check, event log
readout, PIN code request switch off of the SIM card, Firmware upgrade)
◦ File commands: Saving and loading settings
◦ Descriptions: viewing wiring diagram
◦
Settings: setting window size, switch off confirming dialogs
◦ Language: language selection (available languages: English, Hungarian, Italian, German, Slovak,
Slovenian, Dutch, bohemian, Finn, Romanian)
◦
Contact: our contacts; e-mail addresses and phone numbers
◦
GSM: reverting back to factory settings the GSM chip (SIM900 chip) and auxiliary PSTN line monitoring
(in case of a failure), providing GSM information, saving central SMS number of the network operator
•
You can reach the various settings of various items by clicking the appropriate tab
•
On the main page (Basic data tab) clicking the Clock Synchronization makes the module to adjust its time
to the PC clock.
•
After the device established a connection with the mobile network it will automatically adjust the time with the
mobile network (if this feature is available).
Page 8