TellSystem Communication ProCon GSM, Инструкция по установке и эксплуатации

Страница: 10 / 23

ProCon GSM
Event Log Readout
The event log can be viewed by clicking Maintenance
→
Read Event Log button:
•
It can store up to 16,000 events in FILO (first in-last out) mode
•
The acquired list can be saved in ‘’csv” file for later examination. This can be done also in the event list by clicking
the ‘’Open csv” button.
•
In the Token column there are short event information.
•
In the Date column notification dates are stored. IMPORTANT! Date will be accurate if the clock of the module is
synchronized with a PC or with GSM system. The latter is automatically done by the module when connected to
the network of the operator.
•
The GSM 0-31 indicates the signal strength at the time of creation. 31 is the highest, 0 indicates state with no
connection.
•
Network indicates if the module was connected to the network carrier at the time of creation.
•
In the Comment/parameter column notification related extra information are stored.
•
Initially the chart is empty; the readout can be commenced by pressing the Readout event log button.
•
The newest data will appear at the top of the list followed by older entries as you go down the chart.
•
If the whole chart readout is not necessary you can stop it with the Readout stop button.
•
Read out list can be exported from the software in ’’csv’’ (ex. Excel) chart so later it can easily be sent and stored.
Readout of GSM signal strength
The chart of GSM signal strength is available by the Maintenance
→
Show GSM signal strength button
•
You can have the values by pressing the Readout button
•
Measured readings can be displayed by clicking the
’’Reading’’ button.
•
Signal strength fluctuations are divided by hours. Passed time
should be interpreted according to this.
•
Vertical scale is calibrated from 0 to 31. 31 mean the best
signal strength.
•
Size of the chart can be freely altered by left click.
Fill out basic data
Important data of the installed GSM module can be set. Besides
the client name and commissioning address the phone number
of the SIM card inserted in the module and the type of the
attached alarm center also can be set.
•
Data inserted are stored in the module
•
Stored data can be useful later during maintenance.
Page 10