TellSystem Communication ProCon GSM, Инструкция по установке и эксплуатации

Страница: 19 / 23

ProCon GSM
•
OAlso here you can set the SMS programming security code
•
Daily SMS limit: it can be set how many SMSs can the module send a day. This limit can be removed by
entering 255. If you set limit to 0 the module will not send any SMS!
•
Number of maximum SMS sending attempts also can be set.
•
Forwarding SMS arriving to the module to the phone number to be notified. (SMS order: 1234REDIR=1…8)
•
SMS header, which will appear at the beginning of messages. Programming with Android based mobile phone
Starting the program
After program installation it can be started with the AndroRead
icon from the menu.
When installing the application installation from untrusted
sources has to be enabled.
This can be done by checking Settings → Applications →
Untrusted sources.
This function blocks installations of applications that are not from
official sources (not installed from Google Play). Check if your
phone is Bluetooth enabled.
After starting AndroRead it will ask for switching Bluetooth on if it
was previously off. If this demand is rejected the program exits
due to the missing connection link.
Connecting to the module
By tapping the Connect to a Bluetooth programmer button you
can choose the programmer you would like to connect to.
It sees only that programmer that was formerly attached to the
module.
After choosing device a status line runs while the program reads
out actual module settings and state.
When connection is successful main module settings can be read
out.
•
Connected device (usually GSM programmer)
•
Type
•
Firmware version
•
Boot version
The menu tree
In the program header the status changes to Connected: GSM
programmer (name of the connected device).
On this tab the module settings can be refreshed with the Setting
Status button.
By tapping the Menu first navigation menu can be reached.
The settings saving and loading can be achieved by tapping the
Save and Open buttons.
On the first page inputs, outputs, tamper, life sign, power supply
monitor, open/close, jammer, incoming calls and the Other tab
settings can be altered.
By tapping next button the second navigation menu can be
reached. Here the GPRS, remote surveillance, Contact ID and
line simulation values can be altered.
Page 19