TellSystem Communication ProCon GSM, Инструкция по установке и эксплуатации, Страница: 11 / 23

ProCon GSM
Saving phone numbers for notification
• In the phone number tab you can set those phone numbers to which
SMSs and/or voice messages will be sent
•
Numbers given in this section must be in international format to
ensure safe operation.
(Ex.:+36301234567 or 0036301234567)
• For notification maximum 8 phone numbers can be set.
•
You can select these numbers in the following program section.
• This list can be edited also by SMS with the ’’TELx= phone number”
command, where ’’x’ represents the ordinal number of the phone number
chosen for edition. (Example: 1236301234567,
1236304564323) See page 20 for SMS commands.
Saving controlling phone numbers
•
At the Controlling phone numbers section you can set telephone numbers that can control the outputs.
•
Phone numbers can be stored in the memory of the module (maximum 1,000 pcs). Moreover additional phone
numbers can be stored in the SIM card.
•
By using inner memory the module will be independent from the SIM card memory.
•
Always read out the memory before editing the list with the Readout numbers from memory button. For saving
use the Save numbers to memory button.
•
Stored numbers must be in international format. Due to number length using ’’+’’ is suggested (ex.:
+36301234567).
•
Storing, editing and opening of numbers are also possible (from .csv file).
•
Controlling numbers can be associated with specific outputs.
•
By choosing DTMF controlling outputs can be controlled with cell phone buttons (1, 2, 3, 4). Module can be
armed/disarmed with DTMF command (*).
•
The list can be modified also by SMS command with ADD=phone number (addition) and DEL=phone number
(removal) commands
•
(Example: 136301234567, 136301234567)
•
You can find additional information on SMS commands on page 20
Page 11