FlexSym
©
OLT-mini Installation and Turnup Guide
Page 19 of 35
OLT Turnup
•
OLT-mini Initial Configuration
•
•
•
•
OLT-mini Initial Configuration
As shipped, the OLT-mini is configured to facilitate quick and easy out of box setup and
testing. This setup is designed to minimize the effort required to establish initial
connectivity. Once connectivity to the OLT-mini is established, it can be configured to
conform to the current network deployment.
Initial Configuration
Setting
Value
Comments
IP Address
192.168.0.10
Change OLT IP once it is manageable to a valid address
within the install environment.
Default VLAN
100 (untagged)
The default configuration makes the uplink untagged to
make it as easy to turn up as possible. The default
management VLAN is 100 but can be changed to any
value. When fully deployed a tagged VLAN is
recommended to ensure seperation of management
and user traffic and to comply with best security
practices.
Uplink
Configuration
All Uplinks in NET1 LAG
Use EMS or turn up to change to the site configuration.
Uplink Speed
Autodetect 10G/1G based on
module.
First module installed will default the uplink LAG speed
and all modules that match will be enabled to pass
traffic.
