FlexSym
©
OLT-mini Installation and Turnup Guide
Page 24 of 35
Element Management Traffic Tagging
Select tagged(2) or untagged(1). It is recommended that management traffic be
tagged to isolate it from untagged user traffic. This setting must agree with the
upstream switch setting for the management VLAN.
VLAN ID for Element management Communication
This specifies the VLAN ID for management traffic between the OLT and
Panorama.
VLAN Priority
Defines the 802.3P layer 2 priority bits for management packets. It is
recommended that the default setting of 7 be used to ensure management traffic
continues to flow even if the link becomes oversubscribed.
IP Stack Type to use
Select the IP stack type to use for management traffic. The type selected must
agree with the Panorama configuration. Each type defines both an IPv4 and IPv6
address for the OLT and allows management from either address.
Address
Enter the IPv4 address to be used by the OLT-mini.
Network Mask
Enter the network mask for the OLT.
Default Gateway
Enter the default gateway IP address to be used by the OLT.
