FlexSym
©
OLT-mini Installation and Turnup Guide
Page 22 of 35
•
Enter
?
at the command prompt to display a list of commands available in the
current context.
XPON2P4A> _
Commands:
adduser - Allows Admin user to add local users to the database
alarms - alarm related operations
cistbstat - Display CIST Bridge Parameters/Status
cistpstat - Display CIST Port Parameters/Status
closehttpports - Close HTTP ports
connect - Connect to remote board
Cross-Connect - all Cross Connection related commands
...
userinfo - Allows Admin user to see all user info
version - VERSION - Show the current version of software
vlan - vlan profile related operations
whereami - Displays location of this card within the NE
WIZard - Run available Wizards (e.g. ElementManagement(aka Turnup),...)
XPON2P4A> _
The CLI displays the available commands, options, parameters and help (for the
current context) whenever
?
is typed.
•
At the command prompt, enter the command
wiz em tn rn
and press
E
NTER.
This is an abbreviated form of the command
wizard element-manager turnup
run
. This command executes the Turnup Wizard which will collect the data
required to perform the OLT turnup. Below is an example of the Turnup Wizard
execution:
XPON2P4A> wiz em tn run
Do you want to proceed with turnup configuration: (y/n).............................. [Y] : Y
Uplink Interface Configuration:
Number Of Uplink Interfaces (NETs/LAGS) for element management: (1
—
2) ............. [1] : 1
Configuration Details for Uplink Interface #1:
AID of Uplink Interface #1: (NET1).............................................. [NET1] : NET1
Number of ports for NET1: (1-4).....................................................[2] : 1
Enable Link Aggregation Control Protocol (LACP) for NET1: (y/n).....................[Y] : N
Element Management Traffic Tagging: (untagged-1, tagged-2)..........................[2] : 1
VLAN Interface (SVI) for Element Management:
VLAN ID For Element Management Communication: (1-4094).......................... [2995] : 2995
VLAN Priority for Element Management Communication: (0-7).......................... [7] : 7
IP Stack Type to use: (IPv4(1), IVP6(2), Dual(3)).................................. [1] : 1
IPV4 Configuration:
Address: (IPV4 address).............................................. [192.168.0.10] : 192.168.1.201
Network Mask : ...................................................... [255.255.255.0] : 255.255.255.0
Default Gateway: .................................................... [192.168.0.1] : 192.168.0.1
