FlexSym
©
OLT-mini Installation and Turnup Guide
Page 32 of 35
•
Configure (Y/N):
Whether or not to configure the ONT. Selecting
N
will ignore
that ONT and leave it in the unconfigured state. If the EMS has already put
N
in
this field it is typically because the ONT already exists in the system and needs to
be deleted from its previous location.
•
ONT ID:
An unused ONT ID is suggested and can be overridden if desire with any
available ID.
•
User Label:
You can give a name or label to the ONT that can be used to indicate
its location or how it is being used.
The Serial Number and PON AID are automatically populated.
Manual Pre-Configuration
The ONT can be pre-configured via the AddONT option of the EMS.
The intent is that you would configure the ONT prior to installation and upon
installation the unit would be automatically accepted, and go into service without any
further manual intervention.
