FlexSym
©
OLT-mini Installation and Turnup Guide
Page 13 of 35
The OLT-mini comes with a pre-installed mounting plate that has 4 slotted mounting
holes. The OLT-mini is mounted using 4x 1/4" screws to a backboard or wall of a type
appropriate for the material the OLT is being mounted on. The screws must be adequate
for the OLT-mini's 29.2 pounds. In warmer locations, mounting the OLT-mini in shade
will lower the max temperatures and extend the life of the product.
Power Wiring and Grounding
The OLT-mini power is brought in via the conduit openings and wired to the power
termination blocks on the door of the unit. The unit can be wired for either AC or DC
power. If a DC input from an external rectifier is being used, the AC inputs and wiring
can be ignored.
The wiring is defined in the diagram below:
