FlexSym
©
OLT-mini Installation and Turnup Guide
Page 15 of 35
The optical modules used should be selected from the modules listed in the site
preparation section of this document.
Both PON modules must be of the same PON type, i.e. both GPON or XGS-PON.
GPON and XGS-PON modules cannot be mixed in the OLT-mini.
The fibers should then be routed into the enclosure via one of the two conduit holes
and routed to the appropriate modules. Labeling of fibers is recommended to aid in
future fiber maintenance. Two fiber slack spools are provided for excess fiber storage
within the enclosure as shown below.
