Telestream PRISM MPI2-10, Руководство пользователя

Страница: 217 / 302

Application Information
IP Session Application
219
PRISM MPI2-10-MPX2-10 User Manual
Note:
The status indicator turns red if the received RTP sequence numbers do not
change by 1 on every packet.
•
Time Stamp: The timestamp reflects the sampling instant of the first octet in the
RTP datagram. This value can be used to determine packet sequence errors and
jitter calculations to be made.
Note:
The status indicator turns red if the Time Stamp field does not change at 48 kHz
rate on every group of audio samples.
•
SSRC: Identifies the Synchronization Source ID and is set in compliance with
RFC3550. This identifier is chosen randomly and should be unique so no two SSRC
have the same value with an RTP session.
Data Tab Display
Select the DATA tab to view the status of the data in the stream.
Elements of the DATA Tab Display
•
L3 IP
– Source Addr: Lists the source addresses for the L3 IP layer.
– Destination Addr: Lists the destination addresses for the L3 IP layer.
•
L4 UDP
– Source Port: Lists the source ports for the L4 UDP layer.
– Destination Port: Lists the destination ports for the L4 UDP layer.