Telestream PRISM MPI2-10, Руководство пользователя

Страница: 159 / 302

Application Information
Waveform Application
161
PRISM MPI2-10-MPX2-10 User Manual
Line Select Function
Line Select allows you to select a single picture line to monitor in the display. By default
All Lines is selected and all lines are monitored.
Note: The same line is selected in any trace display if line select is enabled.
To turn on Line Select (and choose the line to monitor):
1.
Select the
Lines
button at the bottom of the tile.
2. Select 1 Line .
– To scroll through lines, select the + or – buttons.
– To enter a specific line to monitor:
• select
Line Sel.
and enter the line on the keypad,
or
• in the Picture application, use the line-select cursor (for active lines).
Depending on the resolution in the signal, the Line Select provides different
information.
– If a signal is SD, HD, 3G:
• the Line number is the selected line, including vertical blanking,
• if the signal is interlaced format, the Fields readout is below the Line number,
• the Pic Line number is next to Line; the Pic Line is the active line number, or
numbers, selected.