BRILLANTE User Manual, 59300023, rev005
Installation
•
5
Installation
Mechanical Installation and
Connections
•
Install the BRILLANTE into a 19” cabinet and ensure
sufficient cooling by installing passive ventilation units
above and below it.
•
Connect a monitor and a standard PC-keyboard to the
connectors on the rear panel connectors.
•
Connect Ethernet cable(s) to the back panel RJ-45
connector “1” (and 2) and an ATM cable to the ATM card
connector (RJ-45) on the backside of the unit. The ATM
cable is connected to the VIVACE or PRESTO depending
on the ATMux
TM
system configuration.
•
Connect the supplied mains plug between the rear panel
connector and a 230 VAC wall outlet. For more detailed
instructions refer to the IBM
TM
user manual.
•
Power up the BRILLANTE and see that the indicators on
the front panel of the unit are lit.
•
Proceed by establishing the Ethernet connection through the
TCP/IP network by filling in the required parameters as
described in the next chapter.
