BRILLANTE User Manual, 59300023, rev005
Configuring the BRILLANTE
•
18
repetition_rate
Represents the period in milliseconds for
the repetition of data.
Valid range:
1000…30000.
Data_ID
16-bit identifier which uniquely identifies
a private data stream of a given client id.
This value is allocated by the user.
Data_Stream_ID
16-bit identifier which uniquely identifies
a private data stream within a channel.
This value is allocated by the user.
Server Name
Name of the server where the data will be
sent. This name has to be defined in
<SERVER_LIST> section otherwise an
error will be reported.
repetition_rate
Represents the period in milliseconds for
the repetition of data.
Valid range:
1000…30000.
Data_ID
16-bit identifier which uniquely identifies
a private data stream of a given client id.
This value is allocated by the user.
Data_Stream_ID
16-bit identifier which uniquely identifies
a private data stream within a channel.
This value is allocated by the user.
Country_ID Identifies
a
country using the 3-character
code as specified in
ISO 3166
.
Country_Region_ID Identifies on which time zone table is
used if several time zones are found in
the same country.
‘0’ - no time zone
extension used, ‘1’- most easterly region
and so on…
Desc_Name
User defined name of a CA descriptor.
No duplicate names allowed.
CA_System_ID 16-bit
identifier indicating the type of CA
system applicable for the associated
EMM streams.
Refer to the first two bytes
of client id in <EMMG_LIST> section in
bril.conf.
CA_PID
The PID value of the Transport Stream
packets which contains the EMM
information for the CA systems as
specified with the associated
CA_System_ID.
Valid range: 0…8191.
Refer to the pid value in
<EMMSTREAMS> section in bril.conf.
<TOT>
<CA_DESCRIPTORS>
