BRILLANTE User Manual, 59300023, rev005
Configuring the BRILLANTE
•
13
processes are run in local host and there
is no need to change the default.
ECMG Name
User defined name of an ECM generator.
If the same name is used more than once
then the ECMG pool is created and all
the ECM streams will be shared to that
pool. The pool has a capability for load
balancing. However all the ECM
generators included in the pool shall be
identical because ECM streams will be
allocated automatically between ECMGs.
SuperCASID
32-bit identifier formed by the
concatenation of the CA system id (16
bit) and the CA subsystem id (16 bit). It
shall identify uniquely a (set of)
ECMG(s).
ChannelID
16-bit identifier which is allocated by the
SCS (user) and uniquely identifies an
ECM channel across all connected
ECMGs.
DefaultCP
Indicates the default Crypto period for
the particular ECMG.
IPaddr:Port
IP address and port of the ECMG where
BRILLANTE will connect.
streams@10sec
Maximum number of ECM streams
supported by an ECMG on a channel
during the crypto period time.
Sc_ver
8-bit field identifying the simulcrypt
protocol version used. It shall have the
value 1 or 2.
Spare ECMG
Name of the ECMG which shall be used
as a backup connection. This name has to
be defined earlier in the <ECMG_LIST>
otherwise an error will be reported. If
there is not backup ECMG used then this
value shall be ‘
-
‘ (dash).
For more details refer
to the ‘Spare ECMG in brief ’-section in this document.
Service Name
User defined name of the service for
which the ECM stream is used. No
duplicate names are allowed.
TSID
Transport Stream ID, no need to
configure, reserved for future.
<ECMG_LIST>
<SERVICES>
