BRILLANTE User Manual, 59300023, rev005
Configuring the BRILLANTE
•
12
Configuring the BRILLANTE
Editing the main configuration file
Next the configuration file must be edited. Enter the editor by
typing:
pico –w bril.conf
See the example of configuration file further in this document.
BRILLANTE configuration file
sections
There is a detailed description below about each section found
in configuration file (
bril.conf
). A tabulator separates each field
on a line. Fill in and edit the required parameters.
Lines marked with the character ‘#’ are comment lines and
doesn’t have any affect on configuration. Comment lines can be
used as many as needed to add configuration related
information.
syntax_version
Version of configuration file format.
Do
not change!
scs_pool Address
and
port of BRILLANTE scs
application process. Normally processes
are run in local host and there is no need
to change the default.
emm_relay
Address and port of BRILLANTE emm
relay application process. Normally
processes are run in local host and there
is no need to change the default.
sigen
Address and port of BRILLANTE si
generator application process. Normally
<HEADER>
<BRILLANTE>
