BRILLANTE User Manual, 59300023, rev005
Configuring the BRILLANTE
•
14
Service
ID
Reserved for future, however no
duplicate values may exist (use ‘-‘ dash if
you are unsure)
Component
ID
Reserved for future, use always ‘*’
asterisk character.
Elem.
PID(s)
Reserved for future, however no
duplicate values may exist (use ‘-‘ dash if
you are unsure)
Legato IP:Scrambler ID
IP address and the scrambler ID
of the Legato which will apply the ECM
stream and scrambles services using
received ECM data.
Group Name
User defined name of the group for
which the ECM stream is used. Several
services can be combined to one group.
Service Name
Name of the service to be included in the
group. This name has to be defined in
<SERVICES> section otherwise an error
will be reported.
Service/Group Name
Name of the service or group
which will apply the provided ECM data.
This name has to be defined either in
<SERVICES> or <SERVICEGROUPS>
section otherwise an error will be
reported.
ECMG
Name
Name of the ECM generator which
provides ECM streams. This name has to
be defined in <ECMG_LIST> section
otherwise an error will be reported.
ECM ID
16-bit identifier which is allocated by the
head-end and uniquely identifies an ECM
stream for a Super CAS id.
Initial
AC
Access Criteria contains CA system
specific information of undefined length
and format, needed by the ECMG to
build an ECM.
CP(sec)
This parameter indicates the actual
duration of a particular Crypto period for
a particular stream. This setting overrides
the default CP of corresponding ECM
generator configured in <ECMG_LIST>.
Initial Scrambling
Initial state to indicate if the service shall
be scrambled or unscrambled by default.
<SERVICEGROUPS>
<ECMSTREAMS>
