Teledyne TSIO-360-RB, Руководство по обслуживанию

Страница: 81 / 206

10-1
CHAPTER 10
ENGINE MAINTENANCE
10-1 GENERAL
During engine 50 and 100 hour inspections, if engine components must be remove and
replaced, refer to the applicable disassembly/reassembly instructions found in the TSIO-
360 Series Overhaul Manual, Form OH-08 as outlined in Maintenance Section of each
system.
NOTE . . . Engine operational inspection must be performed prior to any 50 or 100 hour
static inspections. See Section 5-3, “Operational Inspection.”
Compare recorded findings of operational inspection to Operating Limits Section 1-10
and information listed under applicable system 50 and 100 hour inspection of the following
chapters.
Corrections and adjustments will be found in the individual system chapters of this manual
under “Maintenance” and Chapter 23, “Post Maintenance Adjustment and Test.”
At the completion of all 50/100 hour inspection procedures, see Chapter 23 and perform
the post maintenance operational test.
WARNING
The figures depicted in this publication are for illustration purposes only. They are
not intended to be accurate detailed illustrations of any specific engine model, part
or equipment.