Teledyne TSIO-360-RB, Руководство по обслуживанию

Страница: 10 / 206

1-4
1-5 DESCRIPTION OF ENGINE MODEL CODE
Example code: L/TSIO-360-RB (1)
L TS I O 360 RB 1
Left hand
rotation
Turbo super
charged
Fuel injection Horizontally
opposed
Displacement
(360 cubic inch)
model specification
number
1-6 DEFINITION OF TERMS
Front, rear, left and right refer to the engine view facing the accessory end. The accessory
end is referred to as the rear and propeller flange the front of the engine. Cylinders are
numbered starting from the rear with odd numbers on the right and even numbers on the
left.
1-7 ENGINE DESIGN FEATURES
The L//TSIO-360-RB series The L//TSIO-360-RB series engines are air cooled, having six
horizontally opposed overhead inclined valve cylinders. The cylinder displacement of 360
cubic inches is achieved with a 4.4 inch bore and a 3.875 inch stroke. The L/TSIO-360-RB
series engines are fuel injected. The crankshaft is equipped with pendulum type
counterweight dampers that suppress torsional vibrations.
The L/TSIO-360-RB series engine have a doweled six bolt hole configuration propeller
flange. A mounting pad is provided to utilize a hydraulic controlled governor for a constant
speed propeller.
The L/TSIO-360-RB series engines are designed with a wet sump and a positive
displacement oil pump. When properly adjusted under normal operating conditions, the
desired oil pressure is maintained by a pressure relief valve. Engine cranking is
accomplished by a geared right angle drive starter adapter and a direct current starter
motor.
The L/TSIO-360-RB series incorporate provisions for a belt driven alternator installed on the
from 1-3-5 side of the crankcase. The engine is equipped with two gear driven magnetos
mounted on the accessory case. The exhaust and turbocharging system is supplied with
the engine.