manualshive.com logo in svg

Teledyne GFC7001T, Руководство по эксплуатации, Страница: 5 / 312

Поделиться
Скачать
Teledyne GFC7001T Скачать руководство пользователя страница 5

Safety Information Teledyne API – Model T300/T300M CO Analyzer 

 Teledyne 

Analytical 

Instruments 

 

IMPORTANT SAFETY INFORMATION 

Important safety messages are provided throughout this manual.  Please read these messages carefully. 

A safety message alerts you to potential hazards that could hurt you or others.  Each safety message is 
associated with a safety alert symbol.  These symbols are found in the manual and inside the instrument.  The 
definition of these symbols is described below: 

 

WARNING: Electrical Shock Hazard 

 

HAZARD: Strong oxidizer 

 

GENERAL WARNING/CAUTION: Read the accompanying 
message for specific information.

 

 

CAUTION: Hot Surface Warning 

 

Technician Symbol: All operations marked with this symbol are to 
be performed by qualified maintenance personnel only. 

 

DO NOT TOUCH: Touching some parts of the instrument without 
protection or proper tools could result in damage to the part(s) 
and/or the instrument. 

 

Electrical Ground: This symbol inside the instrument marks the 
central safety grounding point for the instrument.

 

 

 

 

CAUTION - General Safety Hazard 

This instrument should only be used for the purpose and in the manner 
described in this manual.  If you use this instrument in a manner other 
than that for which it was intended, unpredictable behavior could ensue 
with possible hazardous consequences. 

NEVER use any gas analyzer to sample combustible gas(es).

 

 

Note 

Technical Assistance regarding the use and maintenance of the 
GFC7001T or any other Teledyne product can be obtained by contacting 
Teledyne  Customer Service Department:  

Phone: 888-789-8168 

Email:  

[email protected]

 

or by accessing various service options on our website at 

http://www.teledyne-ai.com/

. 

 

Содержание GFC7001T

























































































































































































































































































































Отзывы:

Нет отзывов