Teledyne CombiFlash Torrent, Руководство по установке

Страница: 19 / 30

Section 2 Preparation
Plumbing the Torrent to the ELSD requires the connection package, part
#60-5247-021. The package contains the following:
• Metal Tee fitting with reducer
• Two 0.25” mounting spacers for tee
• Two #6x1” pan head screws/flat washers/lock washers
• 1 pc 1/16 OD x 0.02” ID x 6” long tubing
• 1 pc 0.25 OD x 0.188” ID x 100cm long black PTFE tubing w/nut and ferrule
swaged on each end
• 1 pc 0.25 OD x 0.188” ID x 100cm long black PTFE tubing w/nut and ferrule
swaged one end and a metal union on the other end
To plumb the ELSD to the Torrent:
1. With a 3/32” Allen wrench, remove the PEEK tee fitting and metal tubing from
the rear panel of the ELSD unit (refer to Figure 2-9). This will expose both
mounting holes for the metal tee fitting.
Figure 2-8 ELSD rear panel
2. Using the two long screws with lock and flat washers, mount the metal tee fitting
on the rear panel, aligning the two standoffs over the ELSD’s threaded mounting
holes, and the mounting holes in the tee over the two standoffs.