Teledyne 3700, Инструкция по установке и эксплуатации

Страница: 129 / 242

3700 Portable Samplers
Section 3 Programming Guidelines
3-95
Example: Storm Sampling
1. Press
ENTER
/
PROGRAM
to access the interactive state.
. . . STANDBY . . .
10:34:50 12-JUN-04
2. Access the program sequence by selecting “PROGRAM.”
[
PROGRAM
, CONFIGURE]
SAMPLER
Display 1
3. Select “STORM.
[TIME, FLOW,
STORM
]
PACED SAMPLING
Display 12
After displaying this message briefly, the sampler will automatically advance to the next display.
TIME MODE
FIRST BOTTLE GROUP
4. Enter “25” to delay the first group sample 25 minutes. (Acceptable range of values: 0 to 999.)
25 MINUTE DELAY TO
FIRST GROUP SAMPLE
Display 15
5. Enter “2” to take two timed samples.
TAKE
2
TIMED
EVENTS ( 1 - 50 )
Display 23
6. Enter “5” to set the time interval between samples to five minutes.
SAMPLE INTERVALS OF
5 MINUTES (1 - 999)
Display 24
7. Enter the number of bottles per sample event: “3.”
3
BOTTLES PER
SAMPLE EVENT (1-23)
Display 30
8. Enter “1” to place one sample in each bottle.
1 SAMPLES PER
BOTTLE (1 - 2)
Display 31
9. Enter the sample volume of “900” ml.
SAMPLE VOLUMES OF
900 ml (10 - 1000)
Display 50
The sampler will display this message before automatically advancing to the next display.
18 BOTTLES, 18000 ml
AVAILABLE
10. Select “FLOW.”
[TIME,
FLOW
]
SECOND BOTTLE GROUP
Display 14
11. Select “DURING” to fill the second bottle group at the same time as the first bottle group.
[ DURING , AFTER]
TIME MODE
Display 16
12. Enter “5” as the flow-pulse interval. The sampler will take a sample every fifth flow pulse.
SAMPLE EVERY
5 PULSES (1-9999)
Display 22
13. This display requires two entries. Enter “2” hours and “0” to set the maximum amount of time between flow-paced
sample events.