Teledyne 3700, Инструкция по установке и эксплуатации

Страница: 115 / 242

3700 Portable Samplers
Section 3 Programming Guidelines
3-81
5. Enter “0” to set the hours at zero. Press
E
NTER
/
PROGRAM
to store the number “0” and move to the minutes entry.
SAMPLE EVERY
0 HOURS, 10 MINUTES
6. Enter “30” to set the minutes entry to 30.
SAMPLE EVERY
0 HOURS, 30 MINUTES
7. Enter “1” to set the number of bottles per sample event to 1.
1 BOTTLES PER
SAMPLE EVENT (1-24)
8. Select “SAMPLES”.
CHANGE BOTTLES BASED
ON [TIME, SAMPLES }
9. Enter “1” to set the number of samples per bottle to 1.
CHANGE BOTTLES EVERY
1 SAMPLES (1-8)
10. Enter “500” to set the sample volume at 500 ml.
SAMPLE VOLUMES OF
500 ml (10-1000)
11. Select “YES”.
ENTER START TIME
[ YES , NO]
12. Enter the start time and date: 8:00 tomorrow morning.
TAKE FIRST SAMPLE AT
8 :00 20-06 JUN
After this message displays briefly, the sampler will automatically return to the standby state.
PROGRAMMING SEQUENCE
COMPLETE
13. When the sampler is properly installed, press the
S
TART
S
AMPLING
key to run the program.
. . . STANDBY . . .
10:37:23 19-JUN-04
14. To start the sampling routine with the first bottle, accept the blinking “1” by pressing the
E
NTER
/
PROGRAM
key. If
you want to start the routine with another bottle, enter the starting bottle number here.
BOTTLE 1
AT 8:00 10:38:07
This display appears as the sampler counts down the time remaining to the start time. The first line reports the bottle
which will receive the next sample volume. The second line reports the start time at the left and the current time on the
right.
BOTTLE 1
AT 8:00 10:38:07
When start time occurs, the sampler will take the first sample. Which will begins with a pre-sample purge. During the
purge, the display indicates the bottle number which receives the sample volume.
BOTTLE 1
As soon as the pump runs forward to deliver the sample volume, the message on the second line appears and
remains through the post-sample purge.
Example: Time-Paced Sampling: Uniform Intervals (Continued)