Teledyne 3700, Инструкция по установке и эксплуатации

Страница: 121 / 242

3700 Portable Samplers
Section 3 Programming Guidelines
3-87
Example: Flow-Paced Sampling / Time-Based Bottle Sets
1. Press
ENTER
/
PROGRAM
to access the interactive state.
. . . STANDBY . . .
10:34:50 19-JUN-04
2. Access the program sequence by selecting “PROGRAM.”
[
PROGRAM
, CONFIGURE]
SAMPLER
3. Select “FLOW.”
[TIME,
FLOW , STORM]
PACED SAMPLING
4. Enter “1000” to set the pulse interval to 1000 pulses.
SAMPLE EVERY
1000 PULSES (1 - 9999)
5. Enter “2” to set the bottles per sample event to 2. Each bottle set will consist of two bottles.
2 BOTTLES PER
SAMPLE EVENT (1 - 24)
6. Select “TIME.”
CHANGE SETS BASED
ON [TIME, SAMPLES/BTL
]
7. Enter “2” to switch bottle sets every two hours. Press the
ENTER
/
PROGRAM
key to advance to the minutes entry.
CHANGE SETS EVERY
2
HOURS 0 MINUTES
8. Press
ENTER
/
PROGRAM
to accept an entry of “0” for minutes.
CHANGE SETS EVERY
2 HOURS
0 MINUTES
9. Enter “100” to set the sample volume at 100 ml.
SAMPLE VOLUMES OF
100
ml EACH (10 - 330)
10. Select “NO.”
ENTER START TIME?
[YES,
NO
]
11. Select “YES.”
ENTER FIRST SWITCH
TIME? [
YES
, NO]
12. Enter the time at which you want the sampler to move to the second bottle set. At the first bottle set change,
12:00, the bottle set changes will be placed on schedule.
FIRST SET CHANGE AT
12
:00 19-06 JUN
After this message is displayed briefly, the sampler will automatically return to the standby state.
PROGRAMMING SEQUENCE
COMPLETE
13. When the sampler has been correctly installed, press the
START SAMPLING
key to run the program.
. . . STANDBY . . .
10:37:23 19-JUN-04