Teledyne 3700, Инструкция по установке и эксплуатации

Страница: 119 / 242

3700 Portable Samplers
Section 3 Programming Guidelines
3-85
4. Enter “10” to set the pulse interval to 10 pulses.
SAMPLE EVERY
10 PULSES (1 - 9999)
5. Enter “2” to set the number of bottles per sample event to 2.
2 BOTTLES PER
SAMPLE EVENT (1 - 24)
6. Select “SAMPLES/BTL.”
CHANGE SETS BASED
ON [TIME, SAMPLES/BTL
]
7. Enter “1” to set the number of samples per bottle to 1.
CHANGE SETS EVERY
1
SAMPLES (1 - 8)
8. Enter “800” to set the sample volume at 800 ml.
SAMPLE VOLUMES OF
800 ml (10 - 1000)
9. Select “NO.”
ENTER START TIME?
[YES,
NO
]
After this message is displayed briefly, the sampler will automatically return to the standby state.
PROGRAMMING SEQUENCE
COMPLETE
10. When the sampler is installed, press the
START SAMPLING
key to run the program.
. . . STANDBY . . .
10:37:23 19-JUN-04
11. To start the sampling routine with the first bottle, accept the blinking “1” by pressing the
ENTER
/
PROGRAM
key. If
you want to start the routine with another bottle, enter the starting bottle number here.
START SAMPLING
AT BOTTLE
1
(1-23)
This display appears after you press the start sampling key to start the routine. It reports the scheduled start time on
the first line. The second line reports the current time and date.
START FLOW COUNT AT
10:37:23 20-06 JUN
When the scheduled start time arrives, the sampler will begin to count flow pulses. This display indicates the bottles
which will receive sample volumes at the upcoming sample event. (If the bottle set consisted of four bottles, the first
line of the display would read, “BOTTLES 1 - 4.”) The number of flow pulses remaining to the sample event is dis-
played on the second line.
BOTTLES 1- 2
AFTER 10 PULSES
The second line of the display changes as each flow pulse is received.
BOTTLES 1- 2
AFTER 9 PULSES
↓
↓
This display shows one pulse remaining until the sample event.
Example: Extended Flow-Paced Multiplexed (bottles-per-sample)
Sampling (Continued)