SEECTOR User Manual
seector00.doc 27.04.00
31
AP4401
STOPWATCH
USER SETUP
00:00:00
USER-001
PRESET
1
PRESET
3
PRESET
2
LOAD
USER
SELECT
WRITE
DOWN
UP
8.1.10 Destination reduction list
Every fader position can also have a restricted number of
destinations available. The operation is the same as for
source reduction list.
8.1.11 Insert list
Every source and destination can have a reduction list to
remove unwanted insert processes from the insert list.
8.2 User set-up storage
8.2.1 General
All parameters defined in the user set-up as well as actual settings
of switches and encoders can be stored in snapshot set-ups on a
diskette.
The preset memory panel is used for storing and loading snapshot
settings for the console.
The set-ups are given names in the system preset menu.
8.2.2 Controls
•
8-character display
•
Encoder with detents
•
Illuminated User preset switch
•
Illuminated Preset switch 1 to 3
•
Illuminated write switch
The preset selector selects set-ups from the set-up list.
The selected set-up are loaded when the USER PRESET switch is
pressed.
In addition to the selectable user set-ups three basic set-ups are
stored in the user surface independent of the user diskette.
