SEECTOR User Manual
seector00.doc 27.04.00
15
4. Assignable panels
Secondary functions are accessed through an assign panel.
4.1 Main assign panel
4.1.1 General
The main assign panel displays the basic settings for one strip in the
system. Activating the assign function on any fader strip displays the
settings for that specific strip.
The settings can now be adjusted, and are stored even when the
assign panel is attached to another strip.
All sources and destinations in the system have individual settings.
4.1.2 Controls
Source select
•
Source select rotary control
•
8-character display
•
Availability indicator (SELECT)
A rotary control with detents selects a source for the assigned strip.
While the control is turned the source list is shown in the monitor
assign window, and the actual selected source is shown in the panel
displays.
If a source is occupied by another strip, the colour is changed to
passive in the screen list, and the source is skipped on the panel
when turning the rotary control.
If the channel is on air, source select is not permitted and the
availability indicator is off.
Every strip holds its own source reduction list that can reduce the
amount of sources available for the given strip. The source reduction
lists are defined and stored as part of the user set-up.
Destination select
•
Source select rotary control
•
8-character display
•
Availability indicator (SELECT)
A rotary control with detents selects a destination for the assigned
strip.
When a destination is selected the strip is defined as an output strip.
The channel output is connected to this output only.
Input strips do not have any destination selected and routing is
performed as described in the routing section for the faders.
Only one strip can select a given destination at a time. The colour in
the destination list shows which destinations that are occupied.
U
