SEECTOR User Manual
seector00.doc 27.04.00
14
ON SWITCH DEFAULT ON
sets all ON switches to on position at
system power up and at user set-up changes.
Cue system
•
Illuminated CUE switch
•
Illuminated SOLO switch (Optional)
The cue switch serves several functions:
Long push
gives momentary action depending on the selected
source.
•
When the source is of category machine, the monitoring changes
to channel cueing mode where start and rewind messages are
sent.
•
When the source is of category person, talkback is activated.
•
For output faders a long push is activating talkback.
Long pushes are momentary and do not change the indicator.
Short push
toggles PFL mode on and off.
When short pushes toggles PFL, the indicator shows PFL status.
In the user set-up menu several options can be selected for the cue
switch:
PFL cut on open fader
. This option disables the PFL whenever the
channel is on air.
PFL interlock
. This option gives only one active PFL channel at any
time. Any other channel with active PFL will be released.
PFL switches on when a talkback is released.
The SOLO switch connects the channel to the monitoring system for
listening to the selected channel only.
SOLO interlock
. The SOLO switches are mutual exclusive.
3.1.3 Routing section in
assign window
All valid destinations are
indicated in the routing
section. Whenever a routing
to any of these is on this is
indicated in the routing
section.
3.1.4 Routing menu
This menu is a future option.
U
U
