Merging TLA700 Modules
36
TLA700 Series Logic Analyzer Installation Manual
18.
Install the top and bottom rear screws.
19.
Check and tighten all screws.
20.
Place the master module adjacent to the slave module so that the two guide
pins from the slave module line up with the guide pin holes in the master
module.
Master module
Slave module
Guide pins
Figure 24: Lining up the two modules
21.
Gently push the two modules together so that the merge connector of the
slave module merges with the connector on the master module.
22.
Slide the modules all the way into the mainframe until they rest against the
rear panel connectors.
23.
Use the injector handles to firmly seat the modules in place one at a time.
24.
Tighten the four retaining screws on each module to 2.5-in. lbs.
