Tektronix PFG 5105, Инструкция по эксплуатации

Страница: 36 / 89

@
INST ID KEY
Causes the PFG 5105/5505 to display its GPIB ad­
dress, EOI/LF terminator and, if enabled, to g enerate
a service request (SRQ) over the GPIB. To display
the GPIB address or terminator, press INST ID. To
chan g e the address, enter SPCL function code 240,
and press ENTER; press the INCREMENT up- or
down-arrow key to chan g e the displayed address to
the new address, or enter the new address usin g the
DATA keys; press ENTER. To chan g e the terminato r ,
enter SPCL function code 241 and press ENTER; use
the INCREMENT up- and down-arrow keys to chan g e
the displayed terminator selection, press ENTER to
set the selection.
@
OUTPUT ON KEY
Turns the main output of the instrument on (LED on)
or of f .
PFG 51 05/5505 Instruction Manua l
Ope r ating Inst r uctions
@
CONNECTORS
Refer to the specifications in Section 1 for input/
output characteristics and limits.
T RIG IN
SYNC
OUT
SWEEP
OUT
VCO/FM
I N
A M I N
OUTPUT
The input connector for e x ternal TT L­
level tri gg er and g ate functions.
The output depends on the function set.
In the standard modes, the output is a
TTL square wave in phase with the main
output and at the same frequency as
the main output.
Outputs a sweep control volta
g e for use
with an x y oscilloscope or plotter.
The input connector for the FM modu l a­
tion si g nal or the VCO input volta g e.
The input connector for the AM modula­
tion si g nal.
The output connector for the main g en­
erator si g nal.
2-9