Tektronix PFG 5105, Инструкция по эксплуатации

Страница: 22 / 89

Characteristics
Range:
Resolution:
Accuracy:
Stability:
Settling Time:
Jitter
Characteristics
Sweep Type:
Sweep Time:
Sweep Width:
Sweep Ranges:
Accuracy of START/
STOP Frequencies:
Specification
Table 1-8
SYNTHESIZER (OPTION 02)
Performance
Requirements
12.1 Hz to 12 MHz.
Frequency resolution (LSD of display) is
1
o
mHz on lowest range and 1 kHz on
highest frequency range (4.5 digits, or
12000 counts).
± 50 ppm averaged measurement.
Linear.
Table 1-9
FREQUENCY SWEEP
Performance
Requirements
100 ns to 999.9 s per point. 0.1
µs
(4 digit) maximum resolution. 1 sweep
equals 256 points for the time base.
1200: 1 maximum; start frequency and
stop frequency must be in the same
range. See sweep ranges specification.
10 kHz to 12 MHz
1 kHz to 1.2 MHz
100 Hz to 120 kHz
10 Hz to 12 kHz
1 Hz to 1 .2 kHz
0.1 Hz to 120 Hz
0.012 Hz to 12 Hz
Supplemental
Information
± 1 O ppm/
°
C or better.
Typically less than 2 s plus 100 cycles.
< 0.1% from 12.1 Hz to 12 MHz.
Supplemental
Information
STOP frequency must be greater than the
START frequency.
If the highest frequency is less than the
top of the range, the ratio is less than
1200:1.
The STOP frequency determines the sweep
range.
±5% of highest frequency of range, typical.
PFG 5105/5505 Instruction Manual
1-1 3