Tektronix PFG 5105, Инструкция по эксплуатации

Страница: 15 / 89

Specification
Table 1-4
GENERAL OUTPUT CHARACTERISTICS (STANDARD ANALOG FUNCTIONS)
Characteristics
OFFSET
Range:
Resolution:
Accuracy:
Repeatability:
OUTPUT
Resistance:
P rotection
LOW SIGNAL
AMPLITUDE NOISE:
1 -6
Performance
Requirements
±0.6% ±20 mV into 50Q.
Supplemental
Information
Absolute peak amplitude plus offset is lim­
ited to a maximum that is dependent on
the signal amplitude range. Open circuit
values are 2 times the displayed values.
See table below.
Offset Range and Resolution
Peak
Peak-to-Peak Amplitude
+
Resolution
Amplitude Absolute Offset into
Range into SOQ SOQ
1 V - 9.99 V
1
4.99 V 10 mV
0.1 V - 0.999 V
2
0.499 V
0.01 V - 0.099 V
3
0.049 V
mV
mV
1 Maximum offset is ±4.49 V at 1 V amplitude.
2Maximum offset is ±0.449 V at 0.1 V amplitude.
3Maximum offset is ±0.044 V at 0.01 V amplitude.
3 digits. See table above.
± 1 % ±20 mV for 24 hours.
SQQ.
The instrument is nondestructively protec­
ted against short circuits or accidental
voltage of up to 100 V (de plus peak ac)
applied to the main output connector.
Total noise and ripple less than 3 mV p-p
with 1 0 mV output amplitude signal.
PFG 51 05/5505 Instruction Manual