Removal and Installation Procedures
6–46
CSA8000 & TDS8000 Instruments and Sampling Modules
1. Locate module to be removed: Locate the PC Processor Board assembly in
the locator diagram Internal Modules, Figure 6–8, page 6–19. Remove the
following in this order:
H
Trim (all)
H
Bottom cover
H
Left and Right covers
H
Hard Disk and CD Drive
H
Floppy Disk Drive
H
NLX Board
H
Front and Rear Power Distribution Boards
2. Orient the instrument: Set the instrument so its bottom is down on the work
surface and its top panel is facing you.
3. Remove the PC Processor board assembly: See Figure 6–27, page 6–47.
a. Disconnect J190 and J691 ribbon cables from the PC processor board.
b. Remove the nine T-15 Torxdrive screws securing the PC processor board
to the chassis support.
c.
Remove the five T-15 Torxdrive screws securing the PC processor board
assembly to the rear chassis.
4. Remove the PC Processor Board: See Figure 6–27, page 6–47.
a. Remove the two
3
/
16
nut posts that secure the RS–232 connector to the
rear of the support bracket.
b. Remove the two
5
/
16
nut posts that secure the sub-D connector to the rear
of the support bracket.
c.
Remove the two phillips screws that secure the PCMCIA (Personal card,
memory card interface adapter) to the pc processor board. Remove the
PCMCIA from the PC processor board.
d. Disconnect J930 ribbon cable connector from the PC processor board.
e.
Then remove the PC processor board from the instrument.
5. Reinstallation: Do in reverse steps 3 and 4 to reinstall the PC processor
assembly.
PC Processor Board
Содержание CSA8000 Series
