Teknic EF-785, Руководство по установке

Страница: 43 / 90

S
TEP
9: C
ONNECT THE EMBEDDED CONTROL COMPUTER
Connect the host computer, display, and peripherals to the Host Power
receptacles J
A
and J
B
(pictured below) using an IEC detachable cord set.
Connect the host PC’s parallel port to the eF-785’s IEEE-1284 Host
Port (J17) using an IEEE-1284 compliant printer cable.
115V
USB CONNECTORS
(P15, P16)
JA
Host Power
JB
Host Power
P3
Main
AC Motor Power
Load
AC Motor Power
J4
SA
F1, F2
Host Pwr. 8A Max
P12
Safety Harness
Hazardous
AC Out
J2
P14 P13
Safety Control Ext.
DC Motor Supply
48-90VDC
24VDC
Supplies
J5 P6
USB
P15
P16
Main DC Motor Pwr.
90VDC Max.
P7A P7B
P18
40V
100-125/200-240 VAC~ 20A, 50-60Hz
P9 A,B
24VDC
Ckt. 1
P10 A,B
24VDC
Ckt. 2
J8A J8B
Option DC Motor Pwr.
90VDC Max.
P11 A,B
24VDC
Ckt. 3
Net Out Net In
RED BLK
P2
IEEE-1284 Host Port
J17
HOST PC
POWER (JA, JB)
FUSES-HOST PC
POWER (F1, F2)
IEEE-1284 HOST PORT
CONNECTOR (J17)
Host Computer Connectors and Fuses
CPU, D
ISPLAY AND
P
ERIPHERAL
P
OWER
(JA, JB)
The eF-785 has two universal IEC 60320 Type C-13 power outlets which
supply power to the host PC, display and any other peripherals, up to 8A
max. A suitable IEC 60320 detachable cord set must have a Type C-14
plug (on the eF-785 end) and a Type C-13 connector (on the Host PC or
display end).
Note: These cords should be marked as indicated below.
Example Warning Label
The fuses for these outlets are also located on the rear panel of the eF-
785; see fuse-holders F1 and F2 in above illustration. AC power is present
at these two outlets as soon as the eF-785 has been turned on via the
Power/Enable switch. Power is disconnected from the outlets when the
machine’s ‘OFF’ button is pressed.
If you require more than 2 outlets, it is permissible to use a universal
power plug-strip to add more. Suggested products include Tripp-Lite’s
rack-mount AC power distribution unit (p/n PDU12IEC) or International
Configuration’s line of IEC 60320 multiple outlet strips. Each circuit is
rated for 8A max.
H
OST
C
ONTROL
C
ONNECTIONS
IEEE-1284 (J17)
The host PC communicates with the eF-785 via a parallel port connection
to J17 on the rear panel of the eF-785 (see illustration above). An IEEE-
1284 compliant printer cable such as Belkin/F2A045-06 or
e F - 7 8 5 I
N S T A L L A T I O N
M
A N U A L
41
T
EKNIC
, I
NC
F
AX
(585)784-7460 V
OICE
(585)784-7454