Tecnoware ATA 4.0 MM, Руководство пользователя

Страница: 40 / 124

ENGLISH
User’s manual 34 ATA Energy Storage System MM
ATTENTION: to prevent an overload condition occurs, we recommended to have the system up
and running before you activate the devices to be supplied.
ATTENZIONE: in this type of operation there are intervention times, then this may lead to
interruptions of operation to those devices that are not capable of withstanding the presence of
an intervention time.
11.12 Faults and Alarms
CODE DESCRIPTION ACTION TO SOLVE
60 Error in the current control system.
1. Restart the System.
2. If the problem persists, contact the Customer
Service.
71
The firmware installed on each ATA
unit are not equal.
1. Updating the inverter with the same firmware.
2. If the problem persists, contact the Customer
Service
72
The output current for each
inverter is different.
1. Be sure that the sharing cables are properly
connected and restart the System.
2. If the problem persists, contact the Customer
Service.
80 Data communication loss.
1. Be sure that the communication cables are
properly connected and restart the System.
2. If the problem persists, contact the Customer
Service.
81 Host data loss.
82 Synchronization loss.
83
The battery voltage detected on
each ATA is different.
1. Be sure all the ATA units are properly
connected to the same battery pack.
2. If the problem persists, contact the Customer
Service
84
The input voltage and frequency
measured on each ATA drives are
different.
1. Check all the Input connections and restart the
System.
2. If the problem persists, contact the Customer
Service
85 Unbalanced output current.
1. Restart the System.
2. If the problem persists, contact the Customer
Service
86
The Setting Parameter is not the
same in all units.
1. Turn all the ATA units in stand-by mode and
check the Setting Parameter (nr. 28) on each
unit.
2. If the problem persists, contact the Customer
Service