Tecnoware ATA 4.0 MM, Руководство пользователя

Страница: 7 / 124

ENGLISH
ATA Energy Storage System MM 1 User’s manual
User’s Manual - English
Safety Warnings

Read this manual carefully and completely before installing and using ATA ENERGY STORAGE
SYSTEM, which, from here after, will also be referred to as ATA.
 ATA must be used only by properly trained personnel. To ensure correct and safe operations, it is
necessary that operators and maintenance personnel observe the general safety Standards as well
as the specific instructions included in this manual.

Risk of electric shock: do not remove the cover. ATA contains internal parts which are at a high
Voltage and are potentially dangerous, capable of causing injury or death by electric shock.

There are no internal parts in ATA which are user serviceable. Any repair or maintenance work
must be performed exclusively by qualified technical personnel authorized by TECNOWARE.
TECNOWARE declines any responsibility if this warning is disregarded.

The electric installation has to be done by qualified personnel. Follow all the Safety Standards (CEI
Standards in Italy or IEEE elsewhere) for the Input/Output connections and for the right section of
Input/Output cables.
 It is compulsory to ground ATA according to Safety Standards.

Risk of electric shock at the Output lines when ATA is ON.

Risk of electric shock at the Output lines while the unit is connected to the AC utility line.

For respect of the Safety Standards is necessary the presence of a differential circuit breaker
between ATA Output lines and the loads.

We recommend to use a dedicate AC power line for ATA.

Do not obstruct ventilation slots or holes and do not rest any object on top of ATA.

Do not insert objects or pour liquids in the ventilation holes.

Install ATA indoors, in a protected, clean and moisture-free environment.
 Do not expose to the direct sun light.

Do not keep liquids, flammable gases or corrosive substances near ATA.