Technogym Vario Excite + 500, Руководство по техническому обслуживанию

Страница: 168 / 220

VARIO : Service & maintenance manual- rev. 4.2
Page 7.68
Figure 7.21-5
CAUTION: to facilitate the operation
of disassembling,
remove the
electromagnetic brake as described in
paragraph: 7.13. “Disassembling the
electromagnetic brake”.
During this operation support the
flywheel for not to spoil the copper
disk.
8. Remove the central shaft, pressing on the left
side, in the direction of the arrows as shown
in the figure at the side.
Figure 7.21-6
9. Back off the 3 screws (g) using a 3mm
Hexagonal wrench.
10.
Remove the vibration-dumping (h) .
Figure 7.21-7
To disassembly the vibration-dumping from the
central shaft:
11.
Back off the screw (i) using a 5mm
Hexagonal wrench, lock down the shaft (j)
using a 13mm wrench.
12.
Remove the vibration-dumping (k) .
CAUTION: During the reassembly
lock down the screw (j) using a torque
wrench settings to 22Nm.
Continued on following page...