Technogym Vario Excite + 500, Руководство по техническому обслуживанию

Страница: 158 / 220

VARIO : Service & maintenance manual- rev. 4.2
Page 7.58
7.16.3. D
ISASSEMBLING THE LONG BELT
Figure 7.16-8
Carry out the procedure described in paragraph:
7.7.1. “Disassembling the centre guard”, 7.7.2.
“Disassembling the side guards” and 7.7.4.
“Swivel belt connector guard”.
1.
Back off the ring (a) and completely unscrew
the belt end-piece (b) .
WARNING: Put on grease the ends of
the terminals with grease: Krytox
GPL 205, as described in paragraph:
8.5. Grease on long and short belts”.
Two different version of long belt fixing pulley are available:
A.
Pin with two snap rings;
B.
Pin with two adjust eccentrics.
(A)
PIN WITH SNAP-RINGS
Figure 7.16-9
(B)
PIN WITH ADJUST ECCENTRICS
Figure 7.16-10
According to the version on the equipment proceed as follows:
Continued on following page...