9
Menu CONFIG
The following settings are made here
• Language selection
SPR DE / LAN EN
• Time interval for continuous display
TIME N
• Time before resetting to the 1
st
display
TIME R
• Address in the DL-bus network
DL ADR
• Entry of an offset value for sensor correction
OFFSET
• Activation/deactivation of symbols
SYMB
• Changes regarding displayed values
WERTE
• Setting a password for access to the menu KONFIG,
PASSW
• Restarting the sensor
RSTART
• Display/hide operation mode symbols
SYMB
Language selection SPR DE/LAN EN
Switching between German (DE) and English
(EN)
Factory setting: DE
To activate the language selection the
RAS+DL
must be initialised by scrolling forward into the dis
-
play level.
Time interval for continuous display TIME N
Entry 0 = no automatic switching between displays
Factory settings: 0
„0“ flashes after a long key press
Selection of the desired time via a short key press.
Confirmation of the desired time via a long key press.
Entry 15 = The value display scrolls forward to the next
display every 15 seconds
Adjustment range:
0-99 sec in steps of 1 second
