5
Programming manual
Only the basic values are displayed in the factory settings of the room sensor:
• Room temperature
• Relative room humidity
• Ambient air pressure
• Dewpoint
• Nominal value adjustment (+/- 4K)
With the aid of programming, other values can be displayed.
RAS+DL
can the configured using the key and the set up to display further values.
The following symbols are used in the menu descriptions to differentiate between long and short key
presses:
Long key press (at least 2 seconds)
Short key press
Multiple short key presses
Further information about the menu views:
Numbers in
red
mean that they
flash
on the display
.
Exiting a menu level is always possible from the
EXIT
display indication via a
long
key press.
Access to the programming level is only possible with the slider switch set to the „Standby“ po
-
sition (leftmost).
