13
Example:
If an offset value of 0.7K is set and a temperature of 21.0°C is measured, 21.7°C is indicat
-
ed (index values 1 and 2). This corrected value is used in the sequence for all calculations and for
-
warded to the controller.
Among those controllers that have no bidirectional data link (e.g. HZR65), i.e. those for which the
RAS+DL
can only be used as a
remote display,
this menu option is still displayed but has no effect
and can therefore be disregarded.
Display of operating mode symbols SYMB
In this menu, the symbols for the operating mode can be hidden.
Press and hold the button for a long
time to select the required display.
Measurement display VALUES
Not to be confused with the VALUES menu, this is a sub-item in the CONFIG menu
The following values are displayed in sequence:
•RRH
Relative humidity in room
•ARF
Absolute humidity in room
•P
Ambient air pressure
•
C
Temperature
•
DP
Dew point
A long click on a value shows or hides the value.
An asterisk on the right-hand side of the screen
means the value is shown.
Showing/hiding affects the displays in the main
level.
