prematurely terminated, the satellite positions ASTRA and EUTELSAT will be pre-
programmed. If you also wish to receive other satellites, or if you are using a different LNB,
set your digital receiver to the desired data as follows:
>
Use the
Menu
key to call up the
Main menu
.
>
Use the
arrow keys up/down
to mark the line
Settings
.
>
Confirm by pressing
OK
.
The menu
Settings
will be displayed.
>
Now use the
arrow keys up/down
to mark the line
Antenna settings (DVB-S
).
>
Confirm by pressing
OK
.
The menu
Antenna settings
will be displayed
(DVB-S)
.
The following settings can be made in this sub-menu:
6.5.1 Multi-tenna
If the receiver is operated on a multi-tenna-LNB then under this menu point you could
automatically adjust the switch positions on the multi-tenna-LNB.
>
Use the
OK
key to automatically
adjust
the switch positions.
6.5.2 Switching DiSEqC on and off
DiSEqC (
Di
gital
S
atellite
Eq
uipment
C
ontrol) is a digital switching/controlling signal used to
control DiSEqC-compatible components via the antenna cable. If your external unit is
equipped with DiSEqC components, you must switch the DiSEqC controlling function:
>
In this line, use the
arrow keys left/right
to switch
DiSEqC on
or
off
.
As only one LNB can be controlled when the DiSEqC function is switched off, the
menu is limited to the configuration of a single LNB
6.5.3 Antenna signals
Your receiver is equipped with two tuners. This allows you to record one programme while
viewing another programme. So that you can enjoy the full benefit of the functions of your
twin receiver for both recording and playback, you should definitely use two separate
antenna connections (antenna signals). Please also note Point 8.1.
>
In this line, use the
arrow keys left/right
to set the number of antenna signals to
2
, if you are connecting your receiver to two separate antenna connections. If only
one antenna connection is available, then set this item to
1
.
To utilise all the recording facilities of your receiver, you should ensure it is connected via two
independent antenna connections. This allows you to use the following combinations of
recording and playback:
-
Recording a programme and simultaneously watching another programme
(1 programme in HD format and 1 programme in SD format or 2 programmes in
SD format) or call up any recording on the hard drive.
-
Simultaneously record two programmes (1 programme in HD format and
1 programme in SD format or 2 programmes in SD format) even if these are received
in differing reception fields.
-
Simultaneously receive two different programmes (even differing fields of reception;
1 programme in HD format and 1 programme in SD format or 2 programmes in
SD format) and at the same time show a previously recorded programme.
If only
one antenna connection
is available for connection to the receiver, only a limited
range of recording and playback options is available.
22
6
