7.4 Volume control
You have the facility to adjust the volume of your digital receiver. This facilitates the easy
operation of the receiver, as it means you have all the important functions on a single remote
control, and will only rarely have to resort to using the remote control of the television set.
When you switch on the digital receiver, sound will be reproduced at the volume level last
set.
>
To adjust the volume of your digital receiver, press
to increase the
volume, and
Volume -
to decrease it.
>
To switch the sound off (mute), press the key
Sound on/off
press the key again to
switch the sound on again
Please note:
The volume of the digital audio outputs cannot be adjusted.
7.5 Selecting a different language
If a programme is being broadcast in several languages, or with several audio channels, this
will be indicated by a message displayed on screen.
You can then proceed to set a different language or another audio channel as follows:
>
Press the key
Language selection
.
A list indicating the languages currently being broadcast will appear on the screen.
>
Use the
arrow keys up/down
to mark the desired language, and confirm by
pressing
OK
.
You can now proceed to listen to the programme in the language selected. Your
digital receiver is also capable of receiving mono Programmes.
>
Use the a
rrow keys left/right
to select Mono channel 1 (
), Mono channel
2 (
) or Stereo (
).
7.5.1 Dolby Digital
If a programme is being broadcast in Dolby Digital Sound, this will be indicated when you
switch to the programme, as the Dolby logo will be displayed in the Infobox. Provided you
have enabled the Dolby Digital function in accordance with Point 6.3.6, the programme will
automatically be reproduced in this sound format.
If you have not turned on the Dolby Digital function then proceed as follows for manual Dolby
Digital of your appliance:
>
Press the key
Language select
.
If any are being broadcast, a list of the currently broadcast languages as well as
Dolby Digital (AC 3)
will be displayed on screen.
>
Use the
up/down arrow keys
to mark the line
Dolby Digital
.
>
Confirm by pressing
OK
.
You can now listen to the programme in Dolby Digital sound. If you want your appliance to
automatically reproduce programmes in Dolby Digital then set you appliance, as described
under point 6.3.6, for automatic Dolby Digital reproduction.
7.6 TV/Radio switching
The pre-programming includes both TV and radio Programmes.
31
7
