-
Record a programme and at the same time another programme from the
same
reception field
(1 programme in HD format and 1 programme in SD format or
25 programmes in SD format) or show any programme from the hard drive.
-
Simultaneously record two programmes from the
same reception band
(15 programme in HD format and 1 programme in SD format or 2 programmes in
SD5format).
-
Simultaneously record two different programmes from the
same reception band
(15 programme in HD format and 1 programme in SD format or 2 programmes in SD-
format) and at the same time play a pre-recorded programme.
6.5.4 Setting the switching matrix
The menu lists the four switching criteria for the DiSEqC control. You receiver is pre-
programmed so that ASTRA is received on switch setting A/A and Eutelsat is received on
setting B/A of a multi-switch. If the switching matrix of your receiving installation is set up
differently, or if you are receiving different satellites, you can adjust the settings of your digital
receiver to those of the receiving installation as follows.
>
Use the
arrow keys
to select a DiSEqC switch position (1-4) to which you wish to
allocate a satellite (e.g.
A/B 3 No satellite
), and mark this line.
>
Press the
OK
key.
Example 1: 2 satellites (Twin-LNBs)
A selection table listing various satellites will now be displayed.
>
Use the
arrow keys
to mark the desired satellite.
Use the
up/down arrow keys
to move the marker up or down one line at a time,
or use the
left/right arrow keys
to move the marker backward or forward one
page at a time.
If the desired satellite is not included in the list, please use one of the reserve slots,
marked
User 1
to
User 13
.
>
Confirm by pressing
OK
.
The marked satellite will now be added to the menu
Antenna settings
at the
previously marked position
You can now adjust the settings in the menu
Antenna settings
, in this manner until the
settings in this menu correspond to those of your receiving unit. For any switching criteria
that you do not require, use the setting
No satellite
.
23
6
