IV.
FIRST STARTUP
In order for the controller to operate correctly, the following steps must be followed for the first start-up:
Step 1:
Connect the EU-L-X WiFi assembly controller with all the devices it is supposed to control
To connect the wires, remove the cover of the controller and then connect the wiring
–
this should be done as described on
the connectors and the diagrams in the manual.
Step 2.
Switch on the power supply, checking the operation of the connected devices
After connecting all devices, switch on the power supply of the controller.
Using the Manual Operation function (
Menu
→
Fitter’s
Menu → Manual Operation
), check the operation of the individual
devices. Using the
and
buttons, select the device and press the MENU button
–
the device to be checked should turn
on. Check all the connected devices in this manner.
Step 3.
Set the current time and date
To set the current date and time, select:
Menu → Controller settings → Time settings
.
CAUTION
Using the web module, the current time can be adjusted from the network automatically.
Step 4.
Configure temperature sensors, room regulators
In order for the EU-L-X WiFi controller to support a given zone, it must receive information about the current temperature.
The simplest way is to use a wired or wireless temperature sensor (e.g. EU-C-7p, EU-C-mini, EU-CL-mini, EU-C-8r). However,
if you wish to be able to change the set temperature value directly from the zone, you can use room regulators, e.g. EU-
R-8b, EU-R-8z, EU-R-8b Plus or dedicated ones: EU-R-12b and EU-R-12s. To pair the sensor with the controller, select:
Menu → Fitter’s
menu → Zones
Zone… → Room sensor → Select sensor.
Step 5.
Configure the remaining cooperating devices
The EU-L-X WiFi controller can also operate with the following devices:
- EU-i-1, EU-i-1m
- mixing valve module EU-i-1, EU-i-1m- additional contacts, e.g. EU-MW-1 (6 pcs per controller)
After switching on the built-in Internet module, the user has the option to control the installation via the Internet using
the emodul.pl application. For configuration details, refer to the manual of the respective module.
CAUTION
If the user wants to use these devices during operation, they must be connected and/or registered.
