Tech Controllers EU-L-X WiFi, Руководство пользователя

Страница: 24 / 32

MODE 2 - in this mode, it is possible to program the temperature deviations in detail for all working days (Monday –
Friday) and for the weekend (Saturday – Sunday). To do this:
→
Select the option: Set Mode 2
→
Select the part of the week for which you wish to change the temperature settings
→
The further procedure is the same as in Mode 1
Example:
In this case, if the temperature set on the valve is 50°C Monday to Friday, from 4
00
to 7
00
, the temperature on the valve will increase by 5°C, or to 55°C; in the hours from 7
00
to 14
00
it will
decrease by 10°C, so it will be 40°C, while between 17
00
and 22
00
it will increase to 57°C.
During the weekend, from 6
00
to 9
00
hours, the temperature on the valve will rise by 5°C, that is to 55°C, and between
17
00
and 22
00
it will rise to 57°C.
➢
Factory settings – This parameter allows you to return to the settings of a given valve saved by the manufacturer.
Restoring the factory settings changes the valve type to a CH valve.
4.4. INTERNET MODULE
The Internet module is a device that allows remote control of the installation. The user can control the operation of various
devices and change some parameters using the
emodul.pl application.
The device has a built-in Internet module. After switching on the Internet module and selecting the DHCP option, the
controller will automatically retrieve parameters such as: IP address, IP mask, Gateway address and DNS address from the
local network.
Required network settings
In order for the Internet module to operate correctly, it is required to connect the module to a network with a DHCP
server and an open port 2000. Once the Internet module is properly connected to the network, go to the module settings
menu (in the master controller). If the network does not have a DHCP server, the Internet module must be configured by its
administrator by entering the appropriate parameters (DHCP, IP Address, Gateway Address, Subnet Mask, DNS Address).
Configuration can be accomplished by:
1. Go to the settings menu of the Internet module.
2. Select the "Enabled" option
3. Then check if the "DHCP" option is checked.
4. Enter “WIFI Selection”
5. Then select your WIFI network and enter its password.
Time
Temperature - Set for
weekly control
Monday - Friday
PRESET
4
00
‐ 7
00
+5°C
7 00 ‐ 14 00 ‐10°C
17 00 ‐ 22 00 +7°C
Saturday - Sunday
PRESET
6
00
‐ 9
00
+5°C
17 00 ‐ 22 00 +7°C