VI.
CONTROLLER FUNCTIONS
1.
OPERATION MODE
This function enables activation of the selected operating mode.
➢
Normal mode
–
the preset temperature depends on the set schedule
➢
Holiday mode
–
the set temperature depends on the settings of this mode
Menu → Fitter‘s
menu → Zones → Zone… → Settings → Temperature settings > Holiday mode
➢
Economy mode
–
the set temperature depends on the settings of this mode
Menu → Fitter‘s
menu → Zones → Zone… → Settings → Temperature settings > Eco
nomy mode
➢
Comfort mode
–
the set temperature depends on the settings of this mode
Menu → Fitter‘s
menu → Zones → Zone… → Settings →
Temperature settings > Comfort mode
CAUTION
•
Changing the mode to holiday, economy and comfort will apply to all zones. It is only possible to edit the setpoint
temperature of the selected mode for a particular zone.
•
In operation mode other than normal, it is not possible to change the set temperature from the room regulator
level.
2.
ZONES
➢
On
To display the zone as active on the screen, register a sensor in it (see:
Fitter’s
Menu). The function allows you to disable the
zone and hide the parameters from the main screen.
➢
Set temperature
The set temperature in the zone results from the settings of a specific mode of operation in the zone, i.e. the weekly schedule.
However, it is possible to turn off the schedule and set a separate temperature and duration of this temperature. After this
time, the set temperature in the zone will depend on the previously set mode. On an ongoing basis, the set temperature
value, along with the time until the end of its validity, is displayed on the main screen.
CAUTION
In the event that the duration of a specific setpoint temperature is set to CON, this temperature will be valid for an
indefinite period (constant temperature).
➢
Operation mode
The user has the ability to view and edit the operating mode settings for the zone.
•
Local Schedule
–
Schedule settings that only apply to this zone
•
Global Schedule 1-5
–
These schedule settings apply to all zones, where they are active
•
Constant temperature (CON)
- this function allows you to set a separate set temperature value that will be valid in
a given zone permanently, regardless of the time of day
•
With time limitation
–
this function allows you to set a separate temperature that will be valid only for a specific
period of time. After this time, the temperature will result from the previously applicable mode (schedule or
constant without time limit).
